Mobile: (087) 7709000
Phone: (0402) 33522
Fax: (059) 6473859
GET SENSE GET A COOGAN FENCE
Introducing the Clipex Fencing System.
Coogan Fencing is delighted to announce the arrival of the Clipex Fencing System.
Designed to give you a strong durable flexible fencing system that wont let you down.
Clipex can be used with Sheep, Barbed or Plain wire
Using Clipex Insulators the Clipex Fencing System can be adapted to use as an electric fence.
If you had some more time, is there anything you’d like to do with it? Time is the most valuable resource we have, and Clipex Posts are guaranteed to give you more of it. Attaching wire to a Clipex post is more than 11 times faster than tying wire off by hand.
Stainless steel pins and a Dacromet® clip make Clipex stronger than a standard tie wire attachment. The pins are riveted in with a 10T press, so there’s no fiddly parts to come apart or get lost. The clip sits well inside the perimeter of the post, so there’s no chance of them being damaged when using a post driver.
Each post now has an automated weld at the top to guarantee that the post won’t split when being driven with pneumatic drivers in rocky ground.
Clipex Posts use a new, stronger strength to weight design. They are made with min. 450 grade steel, whilst keeping great elongation properties. Our 9 slot posts also feature a new backing plate at ground level and our 5 slots are designed with no holes or slots near ground level, to give our posts strength where it matters most.
SAVE MATERIAL COSTS
In a normal panel fence there’s a lot of costs attached to purchasing a post. Tie wires, extra support line wires and support wire clips. Clipex eliminates these extra costs. Our Tuff Knot wire utilises high tensile vertical wires, and clips directly into our post across multiple line wires.
Clipex Posts require less time spent bending down near the ground and less strain on your hands than twitching tie wire.
There are a lot of new ideas around. But new ideas often make things more complicated. Clipex doesn’t. It’s simple. Even children understand it. Push the wire in and it’s attached. No half attached ties or
All fences need maintenance, but Clipex helps reduce it. Our Tuff Knot wire clips in multiple times to each post, avoiding bows in the wire panel. The Clipex system retains the wire but doesn’t restrict it, allowing the wire to take the strain. When it’s time to restrain, just un-clip and re-strain. You can easily replace Clipex Posts just as easy as when you installed them.
What goes up, must come down. Eventually, your fences will need to be replaced or pulled down. Hopefully that’s a long time away, but when the time comes all wires can be easily salvaged. Just un-clip and roll up the wire leaving exposed posts standing which can be easily pulled up.